Publications

International Journal

Area 1. Surface mechanics and physics

  • Nahas Y., Berneau F., Bonneville J., Coupeau C., Drouet M., Lamongie B, Marteau M., Michel J., Tanguy P., Tromas C., « An experimental UHV AFM-STM device for characterizing surface nanostructures under stress/strain at variable temperature”, Review of Scientific Instruments, 84(10), 105117, 2013.
  • Coupeau C., Parry G., Colin, J., David M.L., Labanowski J., Grilhe J., “Kinetic evolution of blistering in hydrogen-implanted silicon”, Applied Physics Letters, 103(3), 031908, 2013.
  • Michel, C. Coupeau, Y. Nahas, et al., “What can be learnt on the yield stress anomaly of Ni3Al using AFM observations”, Intermetallics, 50, 86, 2014.
  • Guitton, S. Van Petegem, C. Tromas, A. Joulain, H. Van Swygenhoven, L. Thilly, “Effect of microstructure anisotropy on the deformation of MAX polycrystals studied by in-situ compression combined with neutron diffraction”, Applied Physics Letters, 104, 241910, 2014.
  • Moriconi, G. Henaff, D. Halm, “Cohesive zone modeling of fatigue crack propagation assisted by gaseous hydrogen in metals”, International Journal of Fatigue, 68, 56, 2014.

Area 2. Mass and heat transfer

  • Guillaume, A. Camillo, T. Rogaume. “Application and limitations of a method based on pyrolysis models to simulate Railway Rolling Stock fire scenarios”, Fire Technology, Vol.49-4, 2013.
  • A.E. Boyer, M. Gerland, S. Castagnet, “Gas environment effect on cavitation damage in stretched PolyVinylidene Fluoride”, Polymer Engineering and Science, vol. 54 (9), pp.2139-2146, 2014.
  • Guillaume, A. Camillo, T. Rogaume, “Application and limitations of a method based on pyrolysis models to simulate Railway Rolling Stock fire scenarios”, Fire Technology, Vol. 50-2, pp. 317-348, 2014.
  • Fateh, T. Rogaume, F. Richard, “Multi-scale modelling of the thermal decomposition of plywood”, Fire Safety Journal, vol.64, pp.36-47, 2014.
  • Fateh, T. Rogaume, J. Luche, f. Richard, F. Jabouille, “Characterization of the Thermal Decomposition of two kinds of Plywood with a Cone Calorimeter – FTIR apparatus”, Journal of Analytical and Applied Pyrolysis, vol.107, pp. 87-100, 2014.
  • Quang Dao, J. Luche, F. Richard, T. Rogaume, L. Bustamante Valencia, S. Ruban, « Thermal degradation of epoxy resin/carbon fiber composites: Influence of carbon fiber amount on the fire reaction properties and on the gaseous species release », Fire and Materials, ID FAM-13-0051, 2014.
  • Quang Dao, J. Luche, T. Rogaume, L. Bustamante Valencia, S. Ruban “Polyamide 6 and polyurethane used as liner for hydrogen composite cylinder: an estimation of fire behaviours”, Fire Technology, vol.50, n°5, 2014.
  • Muller, H. El-Rabii, R. Fabbro, “Laser ignition of bulk iron, mild, and stainless steel in oxygen atmospheres”, Combustion Science and Technology, 186(7), 953-974, 2014.
  • Muller, H. El-Rabii, R. Fabbro, “Liquid phase combustion of iron and mild steel in an oxygen atmosphere”, Journal of Materials Science 50(9), 3337-3350, 2015.
  • Beringhier, M. Gigliotti, “A novel methodology for the rapid identification of the water diffusion coefficients of composite materials”, Composites Part A: Applied Science and Manufacturing, Vol. 68, 212-218, 2015.
  • C. Grandidier, L. Olivier, M.C. Lafarie-Frenot, M. Gigliotti. “Modeling the pressure dependent solubility in a thermoset resin for simulating pressure accelerated thermo-oxidation tests”, Mechanics of Materials, Vol. 84, 44-54, 2015.
  • Nait-Ali, O. Kane Diallo, S. Castagnet, “Catching the time evolution of microstructure morphology from dynamic covariograms”, Comptes Rendus de Mécanique, doi10.1016/j.crme.2015.02.005.

Area 3. Modelling of electrical phenomena in moving fluids

  • Wu J., Traoré P., Vazquez P.A., Pérez A., « Onset of convection in a finite two- dimensional container due to unipolar injection of ions », Physical Review E, 88, 053018, 2013.
  • Laurentie J.C, Traoré P, Dascalescu L, “Discrete Element Modeling of Triboelectric Charging of Insulating Materials in Vibrated Granular Beds”, Journal of Electrostatics, 71, pp 951-957, 2013.
  • Traoré P., Wu J, “On the limitation of Imposed Velocity Field strategy for Coulomb-driven electroconvection flow simulations”, Journal of Fluid Mechanics, Vol. 727, page R3, 2013.
  • Wu J and Traoré P, “Similarity and comparison of three finite volume schemes for diffusion flux computation on non-orthogonal meshes”, Numerical Heat Transfer, Part B: Fundamentals, Vol. 64(2), page 118-146, 2013.
  • Wu J, Traoré P. Louste C., Koulova D., Romat H., “Direct numerical simulation of dielectric electrohydrodynamic convection in blade-plane configuration”, Journal of Electrostatics, Vol. 71, Issue 3, page 326-331, 2013.
  • Wu J, Traoré P. Louste C., « An efficient finite volume method for electric field-space charge coupled problems », Journal of Electrostatics, Vol. 71, Issue 3, page 319-325, 2013.
  • Wu J., Vázquez P.A., Traoré P., Pérez A.T. « Finite amplitude electroconvection induced by strong unipolar injection between two coaxial cylinders », Physics of Fluids 26 (12), 124105, 2014.
  • Perez A, Vazquez P.,Wu, J., Traoré P. « Electrohydrodynamic linear stability analysis of dielectric liquids subjected to unipolar injection in a rectangular enclosure with rigid sidewalls. » Journal of Fluid Mechanics , vol 758, pp 586-602, 2014.
  • Pérez A., Vazquez A. P., Wu J., Traoré P., “Electrohydrodynamic linear stability analysis of dielectric liquids subjected to unipolar injection in a rectangular enclosure with rigid sidewalls”, Journal of Fluid Mechanics, vol. 758, pp. 586-602, 2014.
  • Wu J., P. Traoré, Fang-Bao Tian, A. T. Pérez, C. Louste and L. Dascalescu, “Effect of mobility parameter on the oscillatory electro-convection of dielectric liquids subject to strong unipolar charge injection”, IEEE Transactions on Industry Applications, Vol. 50(4), pp. 2306-2313, 2014.
  • Clermont, P.; Paillat, T.; Peres, G.; Duval, Y., « Effect of an upstream charge on flow electrification mechanisms of dielectric liquids, » Dielectric Liquids (ICDL), 2014 IEEE 18th International Conference on , vol., no., pp.1,4, June 29 2014-July 3 2014
  • Wu J., Traoré P., Pérez A.T., Vázquez P.A., « On two-dimensional finite amplitude electro-convection in a dielectric liquid induced by a strong unipolar injection », Journal of Electrostatics, 74, 85-95, 2015.
  • Wu J, Traoré P, Tian F-B, Pérez A, Louste C, Dascalescu L, « Numerical investigations of Electrohydrodynamic plumes for locally enhanced cooling in dielectric liquids », IEEE Transactions on Industry Applications, vol 51, NO.1 2015.
  • Traoré P, Wu J, Pelletier Q, Louste C, Dascalescu L. « Electro-Hydro-Dynamic plumes due to autonomous and non autonomous charge injection by a sharp blade electrode in a dielectric liquid », IEEE Transactions on Industry Applications 2015 (in press).
  • Wu J., Traoré P., “A finite volume method for electro-thermo-convective phenomena in a plane layer of dielectric liquid”, Numerical Heat Transfer, Part A: Applications, 2015 (in press).
  • Wu J., Traoré P., Louste C., Dascalescu L., Tian F-B., Pérez A., “Numerical investigations of Electrohydrodynamic plumes for locally enhanced cooling in dielectric liquids”, IEEE Transactions on Industry Applications, DOI 10.1109/TIA.2014.2328775, 2015 (in press).

Area 4. Functional properties of surfaces

  • Nefzaoui, Y. Ezzahri, J. Drevillon, K. Joulain, “Maximal near-field radiative heat transfer between two plates”, European Physical Journal Applied Physics, doi:10.1051/epjap/2013 130162.
  • Tatat M., Gadaud P., Renault P-O, Balmain J., Coupeau, C., Milhet X., “Effect of oxidation on the elastic properties of ferromagnetic metals”, MATERIALS SCIENCE AND ENGINEERING A, Volume: 571   Pages: 92-94   Published: JUN 1 2013.
  • Nefzaoui, J. Drevillon, Y. Ezzahri and K. Joulain, “Simple far-field radiative thermal rectifier using Fabry-Perot cavities based infrared selective emitters”, Applied Optics, 53, 3479-3485, 2014.
  • Nefzaoui, K. Joulain, J. Drevillon and Y. Ezzahri, “Radiative thermal rectification using superconducting materials”, Appl. Phys. Lett., 104, 103905, 2014.
  • Joulain, P. Ben-Abdallah, P.-O. Chapuis, Y. De Wilde, A. Babuty and C. Henkel, “Strong tip-sample coupling in thermal radiation scanning tunnelling spectroscopy”, J. Quant. Spectr. Rad. Transf, 136, 1-15, 2014.
  • Adjemout, N. Brunetière, J. Bouyer, 2015, « Optimization of mesh density for numerical simulations of hydrodynamic lubrication considering textured surfaces », IMechE, Part J, Journal of Engineering Tribology, 2015 (in press).

Area 5. Plasma-assisted heat transfer and combustion

  • Benard, N., A. Debien and E. Moreau, “Time-dependent volume force produced by a non-thermal plasma actuator from experimental velocity field”, Journal of Physics D: Applied Physics 46, 2013.
  • Aba’a Ndong, A. C., N. Zouzou, N. Benard and E. Moreau, “Effect of dielectric aging on the behavior of a surface nanosecond pulsed dielectric barrier discharge”, Dielectrics and Electrical Insulation, IEEE Transactions on 20(5): 1554-1560, 2013.
  • Louste, C., Zelu Y., P. Traoré and R. Sosa, “Electroconvective flow induced by dielectric barrier injection in silicone oil”, Journal of Electrostatics 71(3): 504-508, 2013.
  • Zelu, Y., C. Louste, P. Traoré and H. Romat, “Experimental estimation of the electric force induced by a blade-plane actuator in dielectric liquids”, Journal of Electrostatics 71(3): 478-483, 2013.
  • Zelu, Y., C. Louste, P. Traore and H. Romat, “Velocity and Turbulence Intensity of an EHD Impinging Dielectric Liquid Jet in Blade-Plane Geometry”, Industry Applications, IEEE Transactions on 49(5): 2314-2322, 2013.
  • Tirumala, N. Benard, E. Moreau, M. Fenot, G. Lalizel, and E. Dorignac, « Temperature Characterization of Dielectric Barrier Discharge Actuators: Influence of Electrical and Geometric Parameters », J. Phys. D: Appl. Phys., Vol. 47, 2014.
  • D. Bayoda, N. Benard and E. Moreau, « Elongating the area of plasma/fluid interaction of surface nanosecond pulsed discharges », J. of Electrostatics, Vol. 74, pp 79-84, 2015.

Area 6. Electrical phenomena at the interface of materials

  • J-J. Kadjo, S. Martemianov, J.P. Chabriat, Estimation Of MEA Parameters And Prediction Of PEM Fuel Cells Electrical Performances Using Numerical Modelling”, Russian Journal Of Electrochemistry, 49, No. 4, Pp. 313–323, 2013.
  • Martemianov, V.A. Raileanu, Ch. Coutanceau, Improvement Of The Proton Exchange Membrane Fuel Cell Performances By Optimization Of The Hot Pressing Process For Membrane Electrode Assembly”, Journal Of Solid State Electrochemistry, Vol. 18, No. 5, pp 1261-1269, 2014.
  • Dib A., S. Martemianov, L. Makhloufi, B. Saidani, Calibration Of Electrodiffusion Probes For Turbulent Flow Measurements”, Flow Measurement And Instrumentation, Vol. 35, pp 76-83, 2014.
  • Thami Zeghloul, Lucian Dascalescu, Karim Rouagdia, Ali Fatihou, Pascal Renoux, Dominique Souchet, « Sliding conformal contact tribocharging of polymeric materials », IEEE Transactions on Industry Applications, 2015 (in press).

 

Conférence

Area 1. Surface mechanics and physics

  • Hénaff, D. Halm, M. Arzaghi, G. Bilotta, C. Moriconi, G. Benoit, “Fatigue Crack Propagation under Gaseous Hydrogen: experiments and modeling”, in:  Joint HYDROGENIUS and I2CNER International Workshop on Hydrogen-Materials Interactions, Kyushu University Ito Campus, Fukuoka, Japan, 2014.
  • Bilotta, M. Arzaghi, G. Hénaff, G. Benoit, C. Moriconi, D. Halm, “Hydrogen Assisted Fatigue Crack Growth in a Precipitation-Hardened Martensitic Stainless Steel Under Gaseous Hydrogen”, in:  ASME 2014 Pressure Vessels and Piping Conference, ASME, Anaheim, California, USA, pp. Paper No. PVP2014-28381, pp. V28306BT28306A28014, 2014.
  • Bilotta, C. Moriconi, G. Hénaff, M. Arzaghi, D. Halm, “A Cohesive Zone Model to Simulate Fatigue Crack Propagation under High Pressure Gaseous Hydrogen”, in: G. Clark , C.H. Wang (Eds.) 11th International Fatigue Congress, Fatigue 2014, Advanced Materials Research, Melbourne, Australia, 2014, pp. 765-770, 2014.
  • Bilotta, C. Moriconi, G. Hénaff, D. Halm, M. Arzaghi, “Numerical simulations of Hydrogen-Assisted Cracking in a 15-5PH martensitic stainless steel”, in:  2nd International Conference on Metals and Hydrogen, SteelHydrogen 2014, Gent, Belgium, pp. 177-186, 2014.

Area 2. Mass and heat transfer

  • Q. Dao, T. Rogaume, J. Luche, F. Richard, L. Bustamante Valencia and S. Ruban, « Fire protective performance of intumescent paint and ablative elastomer used for high pressure hydrogen composite cylinder », 11th International Symposium on Fire Safety Science, at the University of Canterbury, New Zealand, February 10-14, 2014.
  • Hermouet, E. Guillaume, T. Rogaume, F. Richard, X. Ponticq, « Development of an experimental design methodology adapted to Controlled Atmosphere Cone Calorimeter in order to evaluate the thermal degradation of solid materials in tunnel fires », 6th International Symposium on Tunnel Safety and Security, Marseille-France, 12-14th march 2014.
  • Benelfellah, D. Halm, T. Rogaume, J. P. Berro Ramirez, V. Alemany Mari, « Study of the mechanical behaviour of composite structures submitted to fire exposure », Mechanics of Composites (MECHCOMP2014), USA, 8-12 June 2014.
  • Alemany Mari, J.P. Berro Ramirez, D. Halm, T. Rogaume, M. Ropital, « Residual strength of wound composite pressure vessels subjected to fire exposure », 16th European conference on composite materials (ECCM), Spain, June 22nd-26th 2014.
  • Hermouet, E. Guillaume, T. Rogaume, F. Richard, X. Ponticq, « Evaluation of the thermal decomposition of solid materials in tunnel related conditions with a controlled atmosphere cone calorimeter », 3rd International Conference Fire in Vehicles (FIVE), Berlin, Germany, 2014.

Area 3. Modelling of electrical phenomena in moving fluids

  • Wu J, Traoré P, Tian F. B, Pérez A, Louste C, Dascalescu L, « Numerical investigations of Electrohydrodynamic plumes for locally enhanced cooling in dielectric liquids », IAS Annual Meeting, 2013/IEEE Transactions on Industry Applications [6th-11tg October, Orlando USA], 2013.
  • Wu J, Traoré P, Tian F.B, Pérez A, Louste C, Dascalescu L, « Effect of mobility parameter on the oscillatory electro-convection of dielectric liquids subject to strong unipolar charge injection », IAS Annual Meeting, 2013/IEEE Transactions on Industry Applications [6th-11tg October, Orlando USA], 2013.
  • Traoré P, Wu J, Pelletier Q, Louste C, « Coulomb-driven plumes due to autonomous and non-autonomous charge injection by a sharp blade electrode in a dielectric liquid », IAS Annual Meeting, 2013/IEEE Transactions on Industry Applications [6th-11tg October, Orlando USA], 2013.
  • Wu J, Traoré P, Tian F.B, « Three-dimensional numerical simulation of electro-convection in a dielectric liquid due to unipolar charge injection in a cavity », IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), page 1038-1041, Shenzhen, China, 2013.
  • Wu J, Traoré P, Tian F.B, « Numerical observation of stationary and oscillatory electro-thermo-convection in a plane layer of dielectric liquid », IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), page 1042-1045, Shenzhen, China, 2013.
  • Jian Wu, P. Traoré, C. Louste, P. A. Vázquez and A. T. Pérez, Numerical modelling of annular electroconvection and its application for heat transfer enhancement, 9th Conference of the French Society of Electrostatics (SFE), Toulouse, France, 2014.
  • A. Vázquez, Jian Wu, P. Traoré and A. T. Pérez, EHD convection in an enclosed rectangular domain, 18th IEEE International Conference on Dielectric Liquids (ICDL), Bled, Slovenia, 2014.
  • Traoré, Jian Wu, C. Louste, P. A. Vázquez and A. T. Pérez, Stability of a plane Poiseuille channel flow of a dielectric liquid subjected to unipolar injection, 18th IEEE International Conference on Dielectric Liquids (ICDL), Bled, Slovenia, 2014.
  • Jian Wu, P. Traoré, P. A. Vázquez and A. T. Pérez, Numerical simulation of annular electroconvection in a dielectric liquid induced by unipolar injection, 18th IEEE International Conference on Dielectric Liquids (ICDL), Bled, Slovenia, 2014.
  • Jian Wu, P. Traoré, C. Louste, P. A. Vázquez and A. T. Pérez, Heat transfer enhancement by an electrohydrodynamic plume induced by ion injection from a hyperbolic blade, 18th IEEE International Conference on Dielectric Liquids (ICDL), Bled, Slovenia, 2014.
  • Leblanc P., J. M. Cabaleiro, T. Paillat, « Numerical study of Electrical double layer development: Analysis of the charge genesis », proc Electrostatic Congress IOP, 2015, Southampton, England, 12-16 April, 2015.

Area 4. Functional properties of surfaces

  • Nefzaoui, Y. Ezzahri, J. Drevillon, K. Joulain, “Maximal near-field radiative heat transfer between two plates”, European Physical Journal Applied Physics, doi:10.1051/epjap/2013 130162.
  • Tatat, M.; Gadaud, P.; Renault, P-O; Balmain, J.; Coupeau, C.; Milhet, X., “Effect of oxidation on the elastic properties of ferromagnetic metals”, MATERIALS SCIENCE AND ENGINEERING A, Volume: 571   Pages: 92-94   Published: JUN 1 2013.
  • Nefzaoui, J. Drevillon, Y. Ezzahri and K. Joulain, “Simple far-field radiative thermal rectifier using Fabry-Perot cavities based infrared selective emitters”, Applied Optics, 53, 3479-3485, 2014.
  • Nefzaoui, K. Joulain, J. Drevillon and Y. Ezzahri, “Radiative thermal rectification using superconducting materials”, Appl. Phys. Lett., 104, 103905, 2014.
  • Joulain, P. Ben-Abdallah, P.-O. Chapuis, Y. De Wilde, A. Babuty and C. Henkel, “Strong tip-sample coupling in thermal radiation scanning tunnelling spectroscopy”, J. Quant. Spectr. Rad. Transf, 136, 1-15, 2014.
  • Adjemout, N. Brunetière, J. Bouyer, « Optimization of mesh density for numerical simulations of hydrodynamic lubrication considering textured surfaces », IMechE, Part J, Journal of Engineering Tribology, 2015.

Area 5. Plasma-assisted heat transfer and combustion

  • Sujar-Garrido, P., Benard, N., Moreau E., and Bonnet, J.P., “Modifications of the shear layer downstream a Backward-Facing-Step by Dielectric Barrier Discharge plasma actuator”, 8th International Symposium On Turbulence and Shear Flow Phenomena, Poitiers, August 28-30, 2013.
  • Sujar-Garrido, P., Benard, N., Moreau E., and Bonnet, J.P., “Active control by surface Dielectric Barrier Discharge actuator of a reattached shear layer”, International Conference on Instability and Control of Massively Separated Flows – ICOMASEF, Prato, Italy, September 5-6, 2013.
  • Daaboul M., Louste C., Traore P. “Deviation and Atomization of a Dielectric Liquid Sheet under Electrohydrodynamic Excitation” ILASS – Europe 2013, 25th European Conference on Liquid Atomization and Spray Systems, Chania, Greece, 1-4 September 2013.
  • Moreau, N. Benard, « EHD force produced by a dc wire-to-cylinder corona discharge”, ISEHD 2014, Okinawa, Japon, 23-25 June 2014.
  • Bayoda, N. Benard, E. Moreau, “Recent developments in nanosecond pulsed sliding discharge for airflow control”, GD 2014, Orleans, France, 7-10 July 2014.
  • Tirumala, N. Benard, E. Moreau, M. Fenot, G. Lalizel, and E. Dorignac, “Correlation between the discharge regime and heat generation in surface DBD plasma actuator”, GD 2014, Orleans, France, 7-10 July 2014.
  • Benard, K. Bayoda, and E. Moreau, « Influence of environmental parameters on surface plasma discharges used as flow control actuator », 49th Int. Symp. of Applied Aerodynamics 2AF, Lille, 24-26 March 2014.
  • Benard, P. Sujar-Garrido, K.D. Bayoda, J.P. Bonnet, and E. Moreau, « Pulsed dielectric barrier discharge for manipulation of a turbulent flow downstream a backward-facing-step », 52nd AIAA Aerospace Sciences Meeting, Washington, 2014.
  • Tirumala, N. Benard, E. Moreau, M. Fenot, G. Lalizel, and E. Dorignac, « Enhancement of Wall Jet Effectiveness in Film Cooling Applications Using DBD Actuators », APS meeting, San Francisco, 2014.
  • Louste C., Yan Z., Gouriou C., Traore Ph., Daaboul M.  » Experimental Estimation of the Electric Force Induced by a Blade-Plane Actuator: Comparison of two reverse methods », 18th IEEE International Conference on Dielectric Liquids (ICDL), Bled, Slovenia, June 30th – July 3th, 2014.
  • Koulova D., Louste C., Romat H., » Experimental study on the influence of the electric field on free surface waves « , 18th IEEE International Conference on Dielectric Liquids (ICDL), Bled, Slovenia, June 30th – July 3th, 2014.
  • Louste C., Yan Z., Traore Ph., Daaboul M.  » Experimental Estimation of the Electric Force Induced by Dielectric Barrier Injection », 18th IEEE International Conference on Dielectric Liquids (ICDL), Bled, Slovenia, June 30th – July 3th, 2014.
  • D. Bayoda, N. Benard and E. Moreau, ‘Electrical and optical characterization of a surface nanosecond pulsed sliding discharge », 9th Conference of the French Society of Electrostatics (SFE), Toulouse, France, August 27th-29th 2014.
  • Gouriou, C. Louste, P. Traoré R. Sosa, « Détermination de la force créée par une pompe EHD en configuration cylindre-plan », 9th Conference of the French Society of Electrostatics (SFE), Toulouse, France, August 27th-29th 2014.
  • Moreau, N. Benard, “Electrohydrodynamic propulsion produced by a dc corona discharge thruster at atmospheric pressure”, 9th Conference of the French Society of Electrostatics (SFE), Toulouse, France, August 27th-29th 2014.
  • Benard, M. Caron, and E. Moreau, « Evaluation of the time-resolved EHD force by particle image velocimetry – a parametric study », Conference Electrostatics 2015, Southampton, 14-16 April 2015.

Area 6. Electrical phenomena at the interface of materials

  • Leblanc, T. Paillat, C. Perrier, G. Morin, “Impact Of An Electric Field On The Charge Accumulation At The Pressboard/Oil Interface”, Proc Icdl/Ieee 2014, Bled, Slovénie, , 29 June – 3 July 2014.
  • Leblanc P., T. Paillat, C. Perrier, G. Morin, “Développement De La Double Couche Electrique à L’interface Solide/Liquide Sous Champ Electrique Continue », 9th Conference of the French Society of Electrostatics (SFE), Toulouse, France, August 27th-29th 2014.
  • Clermont, P. Gilles, T. Paillat, Y. Duval, « Experimental Characterization Of The Charge Generation At [Fuel]/[Tank Wall] Interfaces For Aircraft Fuel Tank Materials », 9th Conference of the French Society of Electrostatics (SFE), Toulouse, France, August 27th-29th 2014.
  • Thami Zeghloul, Lucian Dascalescu, Karim Rouagdia, Ali Fatihou, Pascal Renoux, Dominique Souchet, « Tribocharging phenomena in sliding contacts between polymeric materials », Conf. Rec. IEEE/IAS Ann. Meet., 5-9 October 2014, Vancouver, Canada, DOI: 10.1109/IAS.2014.6978340.
  • Bogdan Neagoe, Thami Zeghloul, Yopa Prawatya, Dominique Souchet, Lucian Dascalescu, “Laboratory bench for the characterization of triboelectric properties of polymers”, Electrostatics 2015, Southampton University, UK, 12-16 April 2015.
  • Yopa Prawatya, Bogdan Neagoe, Thami Zeghloul, Lucian Dascalescu, « Comparison between corona- and tribo-charging of polymers », Conf. Rec. IEEE/IAS Ann. Meet., Dallas, Tx, USA, 22-26 October 2015.

Recherche

Menu principal

Haut de page