Publications

  1. Nahas Y., Berneau F., Bonneville J., Coupeau C., Drouet M., Lamongie B, Marteau M., Michel J., Tanguy P., Tromas C., “An experimental UHV AFM-STM device for characterizing surface nanostructures under stress/strain at variable temperature”, Review of Scientific Instruments, 84(10), 105117, 2013.
  2. Coupeau C., Parry G., Colin, J., David M.L., Labanowski J., Grilhe J., “Kinetic evolution of blistering in hydrogen-implanted silicon”, Applied Physics Letters, 103(3), 031908, 2013.
  3. Michel, C. Coupeau, Y. Nahas, et al., “What can be learnt on the yield stress anomaly of Ni3Al using AFM observations”, Intermetallics, 50, 86, 2014.
  4. Guitton, S. Van Petegem, C. Tromas, A. Joulain, H. Van Swygenhoven, L. Thilly, “Effect of microstructure anisotropy on the deformation of MAX polycrystals studied by in-situ compression combined with neutron diffraction”, Applied Physics Letters, 104, 241910, 2014.
  5. Moriconi, G. Henaff, D. Halm, “Cohesive zone modeling of fatigue crack propagation assisted by gaseous hydrogen in metals”, International Journal of Fatigue, 68, 56, 2014.
  6. Abadias, Ph. Djemia, L. Belliard, Alloying effects on the structure and elastic properties of hard coatings based on ternary transition metal (M = Ti, Zr or Ta) nitrides, Surf. Coat. Technol. 257 (2014) 129 (non comptée en 2014)
  7. Iben Houria, Y. Nadot, R. Fathallah, M.J. Roy, D. M. Maijer, Influence of casting defect and SDAS on the multiaxial fatigue behaviour of A356-T6 alloy including mean stress effect, International Journal of Fatigue, Volume 80, pp. 90-102, 2015 (non comptée en 2015)
  8. Firas Abed El Nabi, Julien Godet, Sandrine Brochard, Laurent Pizzagalli, Onset of ductility and brittleness in silicon nanowires mediated by dislocation nucleation, Modelling Simul. Mater. Sci. Eng. 23 (2015) 025010 (non comptée en 2015)
  9. GUILLOU R., LE BOURHIS E., GOUDEAU P., RENAULT P.-O, GODARD P., FAURIE D., GEANDIER G., MOCUTA C.; THIAUDIÈRE D., Nano-structuration effect on the mechanical behaviour of gold thin films studied by 2D synchrotron x-ray diffraction, Surface and Coatings Technology 308 (2016) 418-423.
  10. HE W., GOUDEAU P., LE BOURHIS E., RENAULT P.-O., DUPRÉ J.-C., DOUMALIN P., WANG S. B., Study on Young’s modulus of thin films on Kapton by microtensile testing combined with dual DIC systems, Surface and Coatings Technology 308 (2016) 273-279.
  11. Abadias, V.V. Uglov, I.A. Saladukhin, S.V. Zlotski, G. Tolmachova, S.N. Dub, A. Janse van Vuuren, Growth, structural and mechanical properties of magnetron-sputtered ZrN/SiNx nanolaminated coatings, Surf. Coat. Technol. 308 (2016) 158-167
  12. Nita, C. Mastail, G. Abadias, Three-dimensional kinetic Monte Carlo simulations of cubic transition metal nitride thin film growth, Phys. Rev. B 93 (2016) 064107
  13. Julien Godet, Clarisse Furgeaud, Laurent Pizzagalli, Michael J. Demkowicz, Uniform tensile elongation in Au–Si core–shell nanowires, Extreme Mechanics Letters 8 (2016) 151–159
  14. BILOTTA, G., G. HENAFF, D. HALM and M. ARZAGHI, “Experimental measurement of out-of-plane displacement in crack propagation under gaseous hydrogen”. International Journal of Hydrogen Energy. 42, 10568-10578. 2017
  15. Gu, J.R. Medy, F. Volpi, O. Castelnau, S. Forest, E. Herve-Luanco, F. Lecouturier, H. Proudhon, P.-O. Renault, L. Thilly, Acta Materialia 141 (2017), 131-141
  16. O.Renault,T.Sadat, P.Godard, W.He, Ph.Guerin, G.Geandier, N.Blanc, N.Boudet, P.Goudeau « Continuous cyclic deformations of a Ni/W film studied by synchrotron X-ray diffraction » Surface and Coatings Technology, Volume 332, 25 December 2017, Pages 351-35
  17. Pierre Godard, Pierre-Olivier Renault, Damien Faurie, and Dominique Thiaudière, « Relaxation mechanisms in a gold thin film on a compliant substrate as revealed by X-ray diffraction », Appl. Phys. Lett. 110, 211901 (2017)
  18. Felipe Cemin, Gregory Abadias, Tiberiu Minea, Clarisse Furgeaud, François Brisset, Denis Solas, Daniel Lundin, Benefits of energetic ion bombardment for tailoring stress and microstructural evolution during growth of Cu thin films, Acta Materialia 141 (2017) 120-130
  19. Felipe Cemin, Daniel Lundin, Clarisse Furgeaud, Anny Michel, Guillaume Amiard, Tiberiu Minea, Gregory Abadias, Epitaxial growth of Cu(001) thin films onto Si(001) using a single step HiPIMS process, we report on a new route to grow epitaxial, Scientific Reports, 7 (2017) 1655
  20. Mastai, M. David, F. Nita, A. Michel, G. Abadias, Ti, Al and N adatom adsorption and diffusion on rocksalt cubic AlN (001) and (011) surfaces: Ab initio calculations, Applied Surface Science 423 (2017) 354–364
  21. Nicolaï, C. Furgeaud, B.W. Fonrose, C. Bail, M.F. Beaufort, Formation mechanisms of Ti2AlC MAX phase on SiC-4H using magnetron sputtering and post-annealing, Materials and Design 144 (2018) 209–213
  22. Julius N. Domfang Ngnekoua, Gilbert Henaff, Yves Nadot,Julien Nicolai, Lionel Ridosz, Fatigue resistance of selectively laser melted aluminum alloy under T6 heat treatment, Procedia Engineering 213 (2018) 79–88
  23. Wei He, Meidong Han, Philippe Goudeau, Eric LeBourhis, Pierre-Olivier Renault, Shibin Wang, Lin-an Li « Strain transfer through film-substrate interface and surface curvature evolution during a tensile test » Applied Surface Science Volume 434, 15 March 2018, Pages 771-780
  24. Azina, J. Roger, A. Joulain, V. Mauchamp, B. Mortaigne, Y. Lu, J-F. Silvain, « Solid-liquid co-existent phase process: Towards fully dense and thermally efficient Cu/C composite materials », Journal of Alloys and Compounds, 738 292e300, (2018)
  25. Aurélie Joseph, Véronique Gauthier-Brunet, Anne Joulain, Joël Bonneville, Sylvain Dubois,Jean-Philippe Monchoux, Frédéric Pailloux, Mechanical properties of Al/ω-Al-Cu-Fe composites synthesized by the SPS technique, Materials Characterization 145 (2018) 644–652 https://doi.org/10.1016/j.matchar.2018.09.025
  26. Aumand, G. Amiard, R. He, Z. Ren, K. White, L. Thilly, Multi-scale study of the deformation mechanisms of thermoelectric p-type half-Heusler Hf0.44Zr0.44Ti0.12CoSb0.8Sn0.2, Journal of Applied Physics, 124 (2018), 175104
  27. Merabet, M. Texier, C. Tromas, S. Brochard, L. Pizzagalli, L. Thilly, J. Rabier, A. Talneau, Y.-M. Le Vaillant, O. Thomas, J. Godet, Low-temperature intrinsic plasticity in silicon at small scales, Acta Materialia, 161 (2018), 54-60
  28. Abadias, Grégory; Anğay, Fırat; Mareus, Rubenson; Mastail, Cédric; Texture and Stress Evolution in HfN Films Sputter-Deposited at Oblique Angles, Coatings, 9 (11), 712, 2019
  29. R.P. Purushottam Raj Purohit, A. Arya, G. Bojjawar, M. Pelerin, S. Van Petegem, H. Proudhon, S. Mukherjee, C. Gerard, L. Signor, C. Mocuta, N. Casati, S. Suwas, A.H. Chokshi, L. Thilly, Revealing the role of microstructure architecture on strength and ductility of Ni microwires by in-situ synchrotron X-ray diffraction, Scientific reports, 9, 1, 79, 2019
  30. Cheikh, I Ben; Parry, G; Dalmas, D; Estevez, R; Marthelot, J; Analysis of the multi-cracking mechanism of brittle thin films on elastic-plastic substrates, International Journal of Solids and Structures, 180, p. 176-188, 2019
  31. Coupeau, C; Boijoux, R; Ni, Y; Parry, G; Interacting straight-sided buckles: An enhanced attraction by substrate elasticity, Journal of the Mechanics and Physics of Solids, 124, p. 526-535, 2019
  32. Coupeau, C; Kazantsev, DM; Drouet, M; Alperovich, VL; Kinetics of anticrossing between slip traces and vicinal steps on crystal surfaces, Acta Materialia, 175, p. 206-213, 2019
  33. Curtet, Emilien; Kedjar, Bouzid; Mompiou, Frédéric; Bahsoun, Hadi; Pailloux, Frédéric; Courcelle, Arnaud; Bono, Matthew; Olier, Patrick; Thilly, Ludovic; Loss of Ductility in Optimized Austenitic Steel at Moderate Temperature: A Multi-scale Study of Deformation Mechanisms, Materialia, 9, 100562, 2019
  34. Douat, Benjamin; Coupeau, Christophe; Bonneville, Joël; Drouet, Michel; Vernisse, Loranne; Kubin, Ladislas; ,, Atomic-scale insight into non-crystallographic slip traces in body-centred cubic crystals, Scripta Materialia, 162, p. 292-295, 2019
  35. Guillotte, Maxime; Godet, Julien; Pizzagalli, Laurent; ,, A fully molecular dynamics-based method for modeling nanoporous gold, Computational Materials Science, 161, p. 135-142, 2019
  36. Guillotte, Maxime; Godet, Julien; Pizzagalli, Laurent; Molecular dynamics study of mechanical behavior of gold-silicon core-shell nanowires under cyclic loading, Materialia, 5, 100204, 2019
  37. Jamnig, Andreas; Sangiovanni, DG; Abadias, G; Sarakinos, Kostas; ,, Atomic-scale diffusion rates during growth of thin metal films on weakly-interacting substrates, Scientific reports, 9, 1, 2019
  38. La Rochelle, J Drieu; Godard, P; Mocuta, C; Thiaudière, D; Nicolai, J; Beaufort, MF; Drouet, M; Renault, PO; , Study of uniaxial deformation behavior of 50 nm-thick thin film of gold single crystal using in situ X-ray pole figure measurements, Surface and Coatings Technology, 377, 124878, 2019
  39. Ngnekou, Julius N Domfang; Nadot, Yves; Henaff, Gilbert; Nicolai, Julien; Kan, Wen Hao; Cairney, Julie M; Ridosz, Lionel; ,, Fatigue properties of AlSi10Mg produced by Additive Layer Manufacturing, International Journal of Fatigue, 119, p.160-172, 2019
  40. Shinko, Tomoki; Hénaff, Gilbert; Halm, Damien; Benoit, Guillaume; Bilotta, Giovambattista; Arzaghi, Mandana; ,, Hydrogen-affected fatigue crack propagation at various loading frequencies and gaseous hydrogen pressures in commercially pure iron, International Journal of Fatigue, 121, p.197-207, 2019
  41. Sinchuk, Y; Pannier, Y; Antoranz-Gonzalez, R; Gigliotti, M; Analysis of moisture diffusion induced stress in carbon/epoxy 3D textile composite materials with voids by µ-CT based Finite Element Models, Composite Structures, 212, p.561-570, 2019
  42. Nicolai J, Furgeaud C, Brenet F., Growth Kinetic Effects on MAX Phase Thin-Films Microstructure., Modern Approaches on Matrerial Sciences, 1, 4, 2019
  43. El Mouatassim, A; Pac, M-J; Pailloux, F; Amiard, G; Henry, P; Rousselot, C; Eyidi, D; Tuilier, M-H; Cabioc’h, T; ,, On the possibility of synthesizing multilayered coatings in the (TiAl) N system by RGPP: A microstructural study, Surface and Coatings Technology, 374, p. 845-851, 2019
  44. Furgeaud, C; Brenet, F; Nicolai, J; Multi-scale study of Ti3SiC2 thin film growth mechanisms obtained by magnetron sputtering, Materialia, 7, 100369, 2019
  45. Godard, P; Faurie, D; Sadat, T; Drouet, M; Thiaudière, D; Renault, PO; ,, X-ray diffraction and stress relaxations to study thermal and stress-assisted annealings in nanocrystalline gold thin films, Acta Materialia, 173, p. 87-95, 2019
  46. He, Wei; Han, Meidong; Wang, Shibin; Goudeau, Philippe; Le Bourhis, Eric; Renault, Pierre Olivier; ,, Elastic property determination of nanostructured W/Cu multilayer films on a flexible substrate, Acta Mechanica Sinica, 35 (6), p. 1210-1216, 2019
  47. Pichon, Luc; Dubois, Jean-Baptiste; Chollet, Sébastien; Larek, Fadella; Cormier, Jonathan; Templier, Claude; ,, Low temperature nitriding behaviour of Ni3Al-like γ′ precipitates in nickel-based superalloys, Journal of Alloys and Compounds, 771, p. 176-186, 2019
  48. I. Richard, T.W. Cornelius, F. Lauraux, J.B. Molin, C. Kirchlechner, S.J. Leake, J. Carnis, T.U. Schülli, L. Thilly, O. Thomas, Variable-wavelength quick scanning nano-focused X-ray microscopy for in situ strain and tilt mapping, Small, accepted  2019
  1. A.E. Boyer, M. Gerland, S. Castagnet, “Gas environment effect on cavitation damage in stretched PolyVinylidene Fluoride”, Polymer Engineering and Science, vol. 54 (9), pp.2139-2146, 2014.
  2. Guillaume, A. Camillo, T. Rogaume, “Application and limitations of a method based on pyrolysis models to simulate Railway Rolling Stock fire scenarios”, Fire Technology, Vol. 50-2, pp. 317-348, 2014.
  3. Fateh, T. Rogaume, F. Richard, “Multi-scale modelling of the thermal decomposition of plywood”, Fire Safety Journal, vol.64, pp.36-47, 2014.
  4. Fateh, T. Rogaume, J. Luche, f. Richard, F. Jabouille, “Characterization of the Thermal Decomposition of two kinds of Plywood with a Cone Calorimeter – FTIR apparatus”, Journal of Analytical and Applied Pyrolysis, vol.107, pp. 87-100, 2014.
  5. Quang Dao, J. Luche, F. Richard, T. Rogaume, L. Bustamante Valencia, S. Ruban, “Thermal degradation of epoxy resin/carbon fiber composites: Influence of carbon fiber amount on the fire reaction properties and on the gaseous species release”, Fire and Materials, ID FAM-13-0051, 2014.
  6. Quang Dao, J. Luche, T. Rogaume, L. Bustamante Valencia, S. Ruban “Polyamide 6 and polyurethane used as liner for hydrogen composite cylinder: an estimation of fire behaviours”, Fire Technology, vol.50, n°5, 2014.
  7. Muller, H. El-Rabii, R. Fabbro, “Laser ignition of bulk iron, mild, and stainless steel in oxygen atmospheres”, Combustion Science and Technology, 186(7), 953-974, 2014.
  8. Muller, H. El-Rabii, R. Fabbro, “Liquid phase combustion of iron and mild steel in an oxygen atmosphere”, Journal of Materials Science 50(9), 3337-3350, 2015.
  9. Beringhier, M. Gigliotti, “A novel methodology for the rapid identification of the water diffusion coefficients of composite materials”, Composites Part A: Applied Science and Manufacturing, Vol. 68, 212-218, 2015.
  10. C. Grandidier, L. Olivier, M.C. Lafarie-Frenot, M. Gigliotti. “Modeling the pressure dependent solubility in a thermoset resin for simulating pressure accelerated thermo-oxidation tests”, Mechanics of Materials, Vol. 84, 44-54, 2015.
  11. Nait-Ali, O. Kane Diallo, S. Castagnet, “Catching the time evolution of microstructure morphology from dynamic covariograms”, Comptes Rendus de Mécanique, 343 (4), pp. 301–306, 2015.
  12. Gigliotti, M., Pannier, Y., Lafarie-Frenot, M.C., Grandidier, J.C., “Some Examples of “Multi-Physical” Fatigue of Organic Matrix Composites for Aircraft Applications”, in Composite Materials and Structures in Aerospace Engineering, Editor: E. Carrera, Special issue of Applied Mechanics and Materials, Trans Tech Publications, Pfaffikon, Chapter 5, 79-96, ISSN print: 1660-9336, 2015.
  13. G., Salvador S., Debenest G., Thovert J.F., “New Granular Model Medium To Investigate Smoldering Fronts Propagation—Experiments”, Energy & Fuels, 29, 6780–6792, 2015, DOI: 10.1021/acs.energyfuels.5b01325
  14. Gerland, S.A.E. Boyer, S. Castagnet, , “Early stages of cavitation in a stretched and decompressed Poly(Vinylidene Fluoride) exposed to diffusive hydrogen, observed by Transmission Electronic Microscopy at the nanoscale”, International Journal of Hydrogen Energy, 41 (3), pp. 1766-1774, 2016.
  15. Kane-Diallo, S. Castagnet, A. Nait-Ali, G. Benoit, J.C. Grandidier, “Time-Resolved statistics of cavity fields nucleated in a gas-exposed rubber under variable decompression conditions – Support to a relevant modeling framework”, Polymer Testing, 51, pp. 122-130, 2016.
  16. Elayeb, G. Debenest, V.V. Mourzenko, J.-F. Thovert – “Smoldering combustion in oil shales. Influence of calcination and pyrolytic reactions”, Transport in Porous Media, doi:10.1007/s11242-016-0805-9, 2016
  17. Q. Dao, J. Luche, F. Richard, T. Rogaume, L. Bustamante Valencia, S. Ruban. Thermal degradation of epoxy resin/carbon fiber composites: Influence of carbon fiber amount on the fire reaction properties and on the gaseous species release. Fire and materials, vol. 40, pp. 27-47, 2016.
  18. H.Y. Quach, A. Benelfellah, B. Batiot, D. Halm, T. Rogaume, D. Bertheau. Determination of the tensile residual properties of a wound carbon/epoxy composite first exposed to fire. Journal of composite materials, mars 2016.
  19. Fateh, F. Richard, B. Batiot, T. Rogaume, J. Luche, J. Zaida. Characterization of the burning behavior and gaseous emissions of pine needles in a cone calorimeter – FTIR apparatus. Fire safety journal, vol. 82, pp. 91-100, 2016.
  20. Batiot, A. Collin, F. Richard, T. Rogaume. Sensitivity and uncertainty analysis of Arrhenius parameters in order to describe the kinetic of solid thermal degradation during fire phenomena. Fire Safety journal, vol. 82, pp. 76-90, 2016.
  21. Gigliotti, M. Minervino, M.C. Lafarie-Frenot, “Thermo-oxidative induced shrinkage in organic matrix composites for high temperature applications: Effect of fibre arrangement and oxygen pressure”, Composite Structures, 146, pp. 176–186, 2016.
  22. Gigliotti, M. Minervino, M.C. Lafarie-Frenot, J.C. Grandidier, “Effect of thermo-oxidation on the local mechanical behaviour of epoxy polymer materials for high temperature applications”, Mechanics of Materials, 101, pp. 118–135, 2016.
  23. Halm, F. Fouillen, E. Lainé, M. Gueguen, D. Bertheau, T. Van Eekelen, “Composite pressure vessels for hydrogen storage in fire conditions: Fire tests and burst simulation”, International Journal of Hydrogen Energy, 42(31), p.20056-20070, 2017
  24. Benelfellah, D. Halm, D. Bertheau, P. Boulet, Z. Acem, D. Brissinger, T. Rogaume, “Effect of a coupled thermomechanical loading on the residual mechanical strength and on the surface temperature of wound carbon/epoxy composite”, Journal of Composite Materials, 51(22), p.3137-3147, 2017
  25. Castagnet, H. Ono, G. Benoit, H. Fujiwara, S. Nishimura, “Swelling measurement during sorption and decompression in a NBR exposed to high-pressure hydrogen”, International Journal of Hydrogen Energy, 42, p. 19359-19366, 2017.
  26. Hazem El-Rabii, Kirill A. Kazakov and Maryse Muller, “Experimental and theoretical study of iron and mild steel combustion in oxygen flows”, Physics of Fluids 29, 037104 (2017); https://doi.org/10.1063/1.4977746
  27. Ono, A. Nait-Ali, O. Kane-Diallo, G. Benoit, S. Castagnet, Influence of pressure cycling on damage evolution in an unfilled EPDM exposed to high-pressure hydrogen, International Journal of Fracture, 210, p. 137-152, 2018.
  28. Sinchuk, Y. Pannier, M. Gueguen, M. Gigliotti, “Image-based Modeling of Moisture Swelling in 2D Textile Composites using a Global-Local Approach”, Proc IMechE Part C: Journal of Mechanical Engineering Science – Special Issue: “Lightweight Design in Transportation Engineering” Guest Editors: Serge Abrate, Southern Illinois University, USA, Vincenzo Crupi, University of Messina, Italy, Gabriella Epasto, University of Messina, Italy, 2018, 232, 8 p. 1505-1519
  29. Sinchuk, Y. Pannier, M. Gueguen, D. Tandiang, M. Gigliotti, “Computed-Tomography based Modelling and Simulation of the Moisture Diffusion and Swelling of Textile Composite Materials”, International Journal of Solids and Structures, 2018, 154, p. 88-96.
  30. Simar, A., Gigliotti, M., Grandidier, J.C., Ammar-Khodja, I. (2018) Decoupling of Water and Oxygen Diffusion Phenomena in order to Prove the Occurrence of Thermo-oxidation during Hygrothermal Aging of Thermosetting Resins for RTM Composite Applications, Journal of Materials Science, 53, p. 11855–11872
  31. Lin, Y., Gigliotti, M., Lafarie-Frenot, M.C., Bai, J. (2018) Numerical Simulation of the Thermoelectric Behavior of CNTs/CFRP Composite Laminates for Aircraft Applications, Advances in Aircraft & Spacecraft Science, 5 (6), p. 633-652
  32. Foti, F., Gigliotti, M., Pannier, Y., Mellier, D., Lafarie-Frenot, M.C. (2018) The Effect of the Environment on High Temperature Fatigue of Cross-Ply C/Epoxy Laminated Composites, Composite Structures, 202, p. 924-934.
  33. Gigliotti, M., Pannier, Y., Sinchuk, Y., Antoranz-Gonzalez, R., Lafarie-Frenot, M.C., Lomov, S.V. (2018) X-ray Micro-Computed-Tomography Characterization of Cracks Induced by Thermal Cycling in Non-crimp 3D Orthogonal Woven Composite Materials with Porosity, Composites Part A: Applied Science and Manufacturing, 112: 100-110. -https://doi.org/10.1016/j.compositesa.2018.05.020
  34. Beringhier, M., Djato, A., Maida, D., Gigliotti, M. (2018) A Novel Protocol for Rapid Identification of Anisotropic Diffusion Properties of Polymer Matrix Composite Materials with Complex Texture, Composite Structures, 201, p. 1088-1096.
  35. Castagnet S., Mellier D., Nait-Ali A., Benoit G., In-situ X-ray computed tomography of decompression failure in a rubber exposed to high-pressure gas, Polymer Testing, 70, pp. 255-262, 2018.
  36. Yang, Jhih-Siang; Pai, David Z; Chiang, Wei-Hung; Microplasma-enhanced synthesis of colloidal graphene quantum dots at ambient conditions, Carbon, 153, p. 315-319, 2019,
  37. Gigliotti, Marco; ,Thermodynamics of Irreversible Processes with Internal Variables: A Tool for Modeling Aging and Degradation Phenomena in Composite Materials for Aircraft Applications, Aerotecnica Missili & Spazio, 98, 1, p. 31-44, 2019
  38. Rogaume, Thomas; Thermal decomposition and pyrolysis of solid fuels: Objectives, challenges and modelling, Fire Safety Journal, 106, p. 177-188, 2019
  39. M. Le, A. Marchand, S. Verma, R. Xu, J. White, A. Marshal, T. Rogaume, F. Richard, J. Luche and A. Trouvé, Simulations of a Turbulent Line Fire with a Steady Flamelet Combustion Model Coupled with Models for Non-Local and Local Gas Radiation Effects, Fire Safety Journal, 106, p. 105-113, 2019
  40. Beringhier, Marianne; Gigliotti, Marco; Vannucci, Paolo; Identification of Diffusion Properties of Polymer-Matrix Composite Materials with Complex Texture, Journal of Optimization Theory and Applications, 184, p. 188-209 , 2020
  41. Djato, A; Beringhier, M; Gigliotti, M; On the identification of diffuso-mechanical properties of polymer matrix materials based on the use of plates with asymmetric moisture concentration field, Mechanics of Materials, 142, 103284, 2020
  1. Wu J., Traoré P., Vazquez P.A., Pérez A., “Onset of convection in a finite two- dimensional container due to unipolar injection of ions”, Physical Review E, 88, 053018, 2013.
  2. Laurentie J.C, Traoré P, Dascalescu L, “Discrete Element Modeling of Triboelectric Charging of Insulating Materials in Vibrated Granular Beds”, Journal of Electrostatics, 71, pp 951-957, 2013.
  3. Traoré P., Wu J, “On the limitation of Imposed Velocity Field strategy for Coulomb-driven electroconvection flow simulations”, Journal of Fluid Mechanics, Vol. 727, page R3, 2013.
  4. Wu J and Traoré P, “Similarity and comparison of three finite volume schemes for diffusion flux computation on non-orthogonal meshes”, Numerical Heat Transfer, Part B: Fundamentals, Vol. 64(2), page 118-146, 2013.
  5. Wu J, Traoré P. Louste C., Koulova D., Romat H., “Direct numerical simulation of dielectric electrohydrodynamic convection in blade-plane configuration”, Journal of Electrostatics, Vol. 71, Issue 3, page 326-331, 2013.
  6. Wu J, Traoré P. Louste C., “An efficient finite volume method for electric field-space charge coupled problems”, Journal of Electrostatics, Vol. 71, Issue 3, page 319-325, 2013.
  7. Wu J., Vázquez P.A., Traoré P., Pérez A.T. “Finite amplitude electroconvection induced by strong unipolar injection between two coaxial cylinders”, Physics of Fluids 26 (12), 124105, 2014.
  8. Perez A, Vazquez  ,Wu, J., Traoré P. “Electrohydrodynamic linear stability analysis of dielectric liquids subjected to unipolar injection in a rectangular enclosure with rigid sidewalls.” Journal of Fluid Mechanics , vol 758, pp 586-602, 2014.
  9. Pérez A., Vazquez A. P., Wu J., Traoré P., “Electrohydrodynamic linear stability analysis of dielectric liquids subjected to unipolar injection in a rectangular enclosure with rigid sidewalls”, Journal of Fluid Mechanics, vol. 758, pp. 586-602, 2014.
  10. Wu J., P. Traoré, Fang-Bao Tian, A. T. Pérez, C. Louste and L. Dascalescu, “Effect of mobility parameter on the oscillatory electro-convection of dielectric liquids subject to strong unipolar charge injection”, IEEE Transactions on Industry Applications, Vol. 50(4), pp. 2306-2313, 2014.
  11. Wu J., Traoré P., Pérez A.T., Vázquez P.A., “On two-dimensional finite amplitude electro-convection in a dielectric liquid induced by a strong unipolar injection”, Journal of Electrostatics, 74, 85-95, 2015.
  12. Wu J, Traoré P, Tian F-B, Pérez A, Louste C, Dascalescu L, “Numerical investigations of Electrohydrodynamic plumes for locally enhanced cooling in dielectric liquids”, IEEE Transactions on Industry Applications, vol 51, 669-678, 2015.
  13. Traoré P, Wu J, Pelletier Q, Louste C, Dascalescu L. “Electro-Hydro-Dynamic plumes due to autonomous and non-autonomous charge injection by a sharp blade electrode in a dielectric liquid”, IEEE Transactions on Industry Applications IEEE Vol.51, no. 3, pp 2504-251 0, DOI: 10.1109/TIA.2014.2382763, (2015)
  14. Traoré P, Wu J., Louste C., Vázquez P.A ,Pérez A.T., ” Numerical study of a plane poiseuille channel flow of a dielectric liquid subjected to unipolar injection “, “,  IEEE Transactions on Dielectric and Electrical Insulation, Vol. 22, no. 5, pp 2779-2785, DOI: 10.1109/TDEI.2015.005107, 2015
  15. Wu J., Traoré P., “A finite volume method for electro-thermo-convective phenomena in a plane layer of dielectric liquid”, Numerical Heat Transfer, Part A: Applications, Vol. 68, pp. 471-500, 2015.
  16. Daaboul M., Traoré P., Vazquez P., Louste C., Study of the transition from conduction to injection in an electrohydrodynamic flow in blade-plane geometry. Journal of Electrostatic, Volume 88, pp 71-75, 2017.
  17. Gouriou C., Traoré P., Louste C., Influence of Seeding Particle Type on Velocity Measurements in Silicone Oil Under High Voltage, IEEE Transactions on Industry Applications, Volume: 53, Issue: 3, May-June 2017.
  18. Seth U. K., Traoré P., Duran-Olivencia F. J., Moreau E., Vazquez P. A. Parametricstudy of DBD plasma actuation based on the Suzen-Huang model . Journal of Electrostatics, 93, pp 1-9, 2018.
  19. Vázquez A, Pérez A. T., Traoré P., Wu J., Electroconvection in a dielectric liquid between two concentric half-cylinders with rigid walls: Linear and non-linear analysis. Physical Review E, vol 97, n°2, 2018
  1. Nefzaoui, Y. Ezzahri, J. Drevillon, K. Joulain, “Maximal near-field radiative heat transfer between two plates”, European Physical Journal Applied Physics, doi:10.1051/epjap/2013 130162.
  2. Tatat M., Gadaud P., Renault P-O, Balmain J., Coupeau, C., Milhet X., “Effect of oxidation on the elastic properties of ferromagnetic metals”, MATERIALS SCIENCE AND ENGINEERING A, Volume: 571 Pages: 92-94   Published: JUN 1 2013.
  3. Nefzaoui, J. Drevillon, Y. Ezzahri and K. Joulain, “Simple far-field radiative thermal rectifier using Fabry-Perot cavities based infrared selective emitters”, Applied Optics, 53, 3479-3485, 2014.
  4. Nefzaoui, K. Joulain, J. Drevillon and Y. Ezzahri, “Radiative thermal rectification using superconducting materials”, Appl. Phys. Lett., 104, 103905, 2014.
  5. Joulain, P. Ben-Abdallah, P.-O. Chapuis, Y. De Wilde, A. Babuty and C. Henkel, “Strong tip-sample coupling in thermal radiation scanning tunnelling spectroscopy”, J. Quant. Spectr. Rad. Transf, 136, 1-15, 2014.
  6. Adjemout, N. Brunetière, J. Bouyer, 2015, “Optimization of mesh density for numerical simulations of hydrodynamic lubrication considering textured surfaces”, IMechE, Part J: Journal of Engineering Tribology, 229, 1132-1144, 2015
  7. Coupeau, J. Durinck, M. Drouet, B. Douat, J. Bonneville, J. Colin, J. Grilhé, “Atomic reconstruction of niobium (111) surfaces”, Surface Science 632, 60-63, 2015
  8. Joulain, Y. Ezzahri, J. Drevillon, P. Ben-Abdallah, ‘’Modulation and amplification of radiative far-field heat transfer: towards a simple radiative thermal transistor’’, Appl. Phys. Lett., 106, 133505, 2015
  9. Joulain, Y. Ezzahri, J. Drevillon, B. Rousseau, D De Sousa Meneses, ‘’Radiative thermal rectification between SiC and SiO2’’, Opt. Exp., 23, A1388-A1397, 2015
  10. Adjemout, M.; Brunetiere, N. & Bouyer, J., “Numerical analysis of the texture effect on the hydrodynamic performance of a mechanical seal”, Surface Topography: Metrology and Properties, 4, 014002, 2016
  11. Joulain K., Drevillon J., Ezzahri Y., Ordonez-Miranda J., Phys. Rev. Lett. 116, 200601, 2016
  12. Kromer, J. Cormier, S. Costil, “Role of Powder Granulometry and Substrate Topography in Adhesion Strength of Thermal Spray Coatings”, J. Thermal Spray Technology, 25(5), 933-945, 2016
  13. Coupeau, O. Camara, J. Durinck, M. Drouet, J. Bonneville, J. Colin, J. Grilhé, Slip trace-induced vicinal step destabilization, Phys. Review B 93, 041405, 2016
  14. Joulain, Y. Ezzahri and R. Carminati, “Thermal emission by a subwavelength aperture”, J. Quantitative Spectroscopy and Radiative Transfer, 173, 1-6, 2016
  15. Hervé, J. Drevillon, Y. Ezzahri, K. Joulain, D. De Sousa Meneses and J. P. Hugonin, “Temperature dependence of a microstructured SiC coherent thermal source”, J. Quantitative Spectroscopy and Radiative Transfer, 180, 29-38, 2016
  16. Ordonez-Miranda, Y. Ezzahri, J. Drevillon and K. Joulain, “Transistorlike device for heating and cooling based on the thermal hysteresis of VO2” Physical Review Applied, 6, 054003, 2016
  17. Ordonez-Miranda, K. Joulain and Y. Ezzahri, “Thermal conductance of a surface phonon-polariton crystal made up of polar nanorods”, Zeitschrift für Naturforschung A, 72, 135-139, 2017
  18. Joulain, Y. Ezzahri and J. Ordonez-Miranda, “Quantum thermal rectification to design thermal diodes and transistors”, Zeitschrift für Naturforschung A, 72, 163-170, 2017
  19. Ordonez-Miranda, Y. Ezzahri and K. Joulain, “Quantum thermal diode based on two interacting spinlike systems under different excitations”, Physical Review E, 95, 022128, 2017
  20. Ordonez-Miranda, K. Joulain, D. De Sousa-Meneses, Y. Ezzahri and J. Drevillon, “Photonic thermal diode based on superconductors”, Journal of Applied Physics, 122, 093105, 2017
  21. M. Sajadi, J. Ordonez-Miranda, J. M. Hill, Y. Ezzahri, K. Joulain and H. Ghasemi, “Invariant for one-dimensional heat conduction in dielectrics and metals” Europhysics Letters, 118, 34001, 2017
  22. Adjemout, M. ; Andrieux, A. ; Bouyer, J. ; Brunetière, N. ; Marcos, G. and Czerwiec, T., “Influence of the real dimple shape on the performance of a textured mechanical seal,” Tribology International , 2017, 115, 409 – 416
  23. Chauraud, J. Durinck, M. Drouet, L. Vernisse, J. Bonneville, C. Coupeau, “Influence of terrace widths on Au(111) reconstruction”, Phys. Rev. B 96, 045410 (2017)
  24. Wang, C. Garnero, G. Rochard, D. Magne, S. Morisset, S. Hurand, P. Chartier, J. Rousseau, T. Cabioc’h, C. Coutanceau, V. Mauchamp, and S. Célérier, « A new etching environment (FeF3/HCl) for the synthesis of two-dimensional titanium carbide MXenes : a route towards selective reactivity vs. water”, Journal of Materials Chemistry A, 5, 22012 (2017)
  25. Kromer, J. Cormier, S. Costil, D. Courapied, L. Berthe, P. Peyre, “High temperature durability of a bond-coatless plasma-sprayed thermal barrier coating system with laser textured Ni-based single crystal substrate”, Surface & Coatings Technology, 337, 168-176, 2018
  26. Adjemout, N. Brunetière, J. Bouyer, “Friction and temperature reduction in a mechanical face seal by a surface texturing: comparison between TEHD simulations and experiments” Tribology Transactions, Taylor & Francis, 61, pp. 1084-1093, 2018
  27. Boijoux, G. Parry, C. Coupeau, Buckle depression as a signature of young’s modulus mismatch between a film and its substrate, Thin Solid Films 645, 041405 (2018)
  28. Ait-Oubba, C. Coupeau, J. Durinck, M. Talea, J. Grilhé, Effect of surface on the dissociation of perfect dislocations into Shockley partials describing the herringbone Au(111) surface reconstruction, Phil. Mag. 98, 1594 (2018)
  29. Ordonez-Miranda, D. Lemonnier, Y. Ezzahri and K. Joulain, “Analytical Description of The Radiative-Conductive Heat Transfer in a Gray Medium Contained Between Two Diffuse Parallel Plates”, Applied Mathematical Modelling, 56, 51-64 (2018).
  30. Prod’Homme, J. Ordonez-Miranda, Y. Ezzahri, J. Drevillon and K. Joulain, “VO2-based Radiative Thermal Transistor with a Semi-Transparent Base”, Journal of Quantitative Spectroscopy and Radiative Transfer, 210, 52-61 (2018).
  31. Hervé, J. Drevillon, Y. Ezzahri and K. Joulain, “Radiative Cooling by Tailoring Surface with Microstructures: Association of a Grating and a Multi-Layer Structure”, Journal of Quantitative Spectroscopy and Radiative Transfer, 221, 155-163 (2018).
  32. Célérier, S. Hurand, C. Garnero, S. Morisset, M. Benchakar, A. Habrioux, P. Chartier, V. Mauchamp, N. Findling, B. Lanson, and E. Ferrage, « Hydration of Ti3C2Tx MXene: An Interstratification Process with Major Implications on Physical Properties », Chemistry of Materials, 31(2), 454-461 (2019)
  33. Benchakar, Mohamed; Bilyk, Thomas; Garnero, Cyril; Loupias, Lola; Morais, Claudia; Pacaud, Jérôme; Canaff, Christine; Chartier, Patrick; Morisset, Sophie; Guignard, Nadia; MXene Supported Cobalt Layered Double Hydroxide Nanocrystals: Facile Synthesis Route for a Synergistic Oxygen Evolution Reaction Electrocatalyst, Advanced Materials Interfaces, 6 (23), 1901328, 2019
  34. Chauraud, D; Durinck, J; Drouet, M; Vernisse, L; Bonneville, J; Coupeau, C; ,, How slip traces modify the Au (111) reconstruction, Physical Review B, 99 (19), 195404, 2019
  35. Douat, Benjamin; Colin, Jérôme; Bergamaschini, Roberto; Montalenti, Francesco; Drouet, Michel; Bonneville, Joël; Coupeau, Christophe; ,, Slip trace-induced terrace erosion, Applied Surface Science, 466, p. 454-458, 2019
  36. Giouse, J-B; White, K; Tromas, C; ,, Nanoindentation characterization of the surface mechanical properties of a 17-4PH stainless steel substrate treated with grit blasting and coated with a Cr3C2-NiCr coating, Surface and Coatings Technology, 368, p. 119-125, 2019
  37. Smerdova, Olga; Pecora, Marina; Gigliotti, Marco; ,, Cyclic indentation of polymers: Instantaneous elastic modulus from reloading, energy analysis, and cyclic creep, Journal of Materials Research, 34, (21), p. 3688-3698, 2019
  1. Benard, N., A. Debien and E. Moreau, “Time-dependent volume force produced by a non-thermal plasma actuator from experimental velocity field”, Journal of Physics D: Applied Physics 46, 2013.
  2. Aba’a Ndong, A. C., N. Zouzou, N. Benard and E. Moreau, “Effect of dielectric aging on the behavior of a surface nanosecond pulsed dielectric barrier discharge”, Dielectrics and Electrical Insulation, IEEE Transactions on 20(5): 1554-1560, 2013.
  3. Louste, C., Zelu Y., P. Traoré and R. Sosa, “Electroconvective flow induced by dielectric barrier injection in silicone oil”, Journal of Electrostatics 71(3): 504-508, 2013.
  4. Zelu, Y., C. Louste, P. Traoré and H. Romat, “Experimental estimation of the electric force induced by a blade-plane actuator in dielectric liquids”, Journal of Electrostatics 71(3): 478-483, 2013.
  5. Zelu, Y., C. Louste, P. Traore and H. Romat, “Velocity and Turbulence Intensity of an EHD Impinging Dielectric Liquid Jet in Blade-Plane Geometry”, Industry Applications, IEEE Transactions on 49(5): 2314-2322, 2013.
  6. Tirumala, N. Benard, E. Moreau, M. Fenot, G. Lalizel, and E. Dorignac, “Temperature Characterization of Dielectric Barrier Discharge Actuators: Influence of Electrical and Geometric Parameters”, J. Phys. D: Appl. Phys., Vol. 47, 2014.
  7. D. Bayoda, N. Benard and E. Moreau, “Elongating the area of plasma/fluid interaction of surface nanosecond pulsed discharges”, J. of Electrostatics, Vol. 74, pp 79-84, 2015.
  8. Benard N., Mizuno A., and Moreau E., ‘Manipulation of a grid-generated mixing with an active honeycomb dielectric barrier plasma discharge’, Applied Physics Letters, vol. 107(24), 5 pages, 2015.
  9. Sujar-Garrido P., Benard N., Moreau E., and Bonnet J.P., ‘Dielectric barrier discharge plasma actuator to control turbulent flow downstream of a backward-facing step’ Experiments in Fluids , vol. 56, 16 pages, 2015.
  10. Sujar-Garrido P., Benard N., Moreau E., and Bonnet J.P., ‘Active control by surface dielectric barrier discharge actuator of a reattached shear layer’, Fluid Mechanics and its Applications, vol. 107,pp. 189-194, 2015.
  11. Bayoda K.D., Benard N., and Moreau E., ‘Nanosecond pulsed sliding dielectric barrier discharge plasma actuator for airflow control: Electrical, optical, and mechanical characteristics’, Journal of Applied Physics, vol. 118, 14 pages, 2015.
  12. Bayoda K.D., Benard N., and Moreau E., ‘Electrical and mechanical characteristics of nanosecond pulsed sliding dielectric barrier discharges with different electrode gaps,’ Journal of Physics, vol. 646, 7 pages, 2015.
  13. Benard N., Caron M., and Moreau E., ‘Evaluation of the time-resolved EHD force produced by a plasma actuator by particle image velocimetry – a parametric study,’ Journal of Physics, vol. 646, 7 pages, 2015.
  14. Gouriou, P. Traoré,C. Louste,” Influence of seeding particle type on velocity measurements in silicone oil under high voltage”, IEEE transaction on industry Applications, vol 99, pp 1-6 DOI 10.1109/TIA.2017.2674618
  15. Benard N., Bayoda K.D., Aba’a Ndong A.C., Moreau E., “A Nanosecond Surface Dielectric Barrier Discharge Operating Under Altitude Conditions for Aeronautics Applications”, IEEE Transactions on Plasma Science, Vol. 44(5), pp. 1-8, 2016.
  16. Audier P, Benard N., Moreau E., “Flow control of an elongated jet in cross-flow: Film cooling effectiveness enhancement using surface dielectric barrier discharge plasma actuator”, Applied Physics Letters, Vol. 108(8), pp. 1-4, 2016.
  17. Audier P., Fenot M., Benard N., Moreau E., “Film cooling effectiveness enhancement using surface dielectric barrier discharge plasma actuator”, International Journal of Heat and Fluid Flow, Vol. 62, pp. 247–257, 2016.
  18. Benard N., Sujar-Garrido P., Bonnet J.P., Moreau E., “Control of the coherent structure dynamics downstream of a backward facing step by DBD plasma actuator”, International Journal of Heat and Fluid Flow vol. 61, pp. 158–173, 2016.
  19. Sujar-Garrido P., Benard N., Moreau E., Bonnet J.P., “Modifications on the reattachment region of a turbulent step flow using a dielectric barrier discharge actuator”, Fluid-Structure-Sound Interactions and Control, pp. 313-318, 2016.
  20. Benard N., Mizuno A., Moreau E., “Mixing improvement by manipulation of multiple jets using active plasma actuator”, International Journal of Plasma Environmental Science & Technology, Vol. 10, pp. 108-114, 2016.
  21. Benard N., Pons-Prats J., Periaux J., Bugeda G, Braud P., Bonnet J.P., Moreau E., “Turbulent separated shear flow control by surface plasma actuator: experimental optimization by genetic algorithm approach”, Experiments in Fluids, Vol. 57, 22 pages, 2016.
  22. Benard N., Audier P., Moreau E., Mizuno A., “Active plasma grid for on-demand airflow mixing increase “, J. of Electrostatics, Vol. 88, pp. 15-23, 2017.
  23. Defoort E., Benard N., Moreau E., “Ionic wind produced by an electro-aerodynamic pump based on corona and dielectric barrier discharges “, J. of Electrostatics, Vol. 88, pp. 30-45, 2017.
  24. Benard N., Note P., Caron M., Moreau E., “Highly time-resolved investigation of the electric wind caused by surface DBD at various ac frequencies“, J. of Electrostatics, Vol. 88, pp. 41-48, 2017.
  25. Gouriou C., Traoré P., Louste C., “Influence of Seeding Particle Type on Velocity Measurements in Silicone Oil Under High Voltage”, IEEE Transactions on Industry Applications, vol. 53, pp. 2471-2476, 2017.
  26. Serpieri J., Yadala Venkata S., Kotsonis M., “Conditioning of cross-flow instability modes using dielectric barrier discharge plasma actuators”, Journal of Fluid Mechanics, Vol. 833, pp. 164-205, 2017.
  27. Moreau E., Audier P., Benard N., “Ionic wind produced by positive and negative corona discharges in air”, Journal of Electrostatics, Vol. 93, pp. 85-96, 2018.
  28. Moreau E., Cazour J., Benard N., « Influence of the air-exposed active electrode shape on the electrical, optical and mechanical characteristics of a surface dielectric barrier discharge plasma actuator », Journal of Electrostatics, Vol. 93, pp. 146-153, 2018.
  29. Yadala S., Hehner M., Serpieri J., Benard N., Dörr P., Kloker M., Kotsonis M., “Experimental control of swept-wing transition through base-flow modification by plasma actuators”, Journal of Fluid Mechanics, Vol. 844, doi:10.1017/jfm.2018.268, 2018.
  30. Seth U. K., Traoré P., Duran-Olivencia F. J., Moreau E., Vazquez P. A., “Parametricstudy of DBD plasma actuation based on the Suzen-Huang model”, Journal of Electrostatics, Vol. 93, pp 1-9, 2018.
  31. Benard, Nicolas; Sujar-Garrido, P; Bonnet, Jean-Paul; Moreau, E; Shear Layer and Shedding Modes Excitations of a Backward-Facing Step, Advances in “Effective Flow Separation Control for Aircraft Drag Reduction: Modeling, Simulations and Experimentations”, Springer, chap.3, p. 55-74, 2019 (book)
  32. Moreau, Eric; Audier, Pierre; Orriere, Thomas; Benard, Nicolas; Electrohydrodynamic gas flow in a positive corona discharge, Journal of Applied Physics, 125 (13), 133303, 2019
  33. Orrière, Thomas; Moreau, Éric; Pai, David Z; ,, Electric wind generation by nanosecond repetitively pulsed microplasmas, Journal of Physics D: Applied Physics, 52 (46), 464002, 2019
  34. Dib, A; Maizia, R; Martemianov, S; Thomas, A; ,, Statistical Short Time Analysis for Proton Exchange Membrane Fuel Cell Diagnostic‐Application to Water Management, Fuel Cells, 19 (5), p. 539-549, 2019
  1. J-J. Kadjo, S. Martemianov, J.P. Chabriat, “Estimation Of MEA Parameters And Prediction Of PEM Fuel Cells Electrical Performances Using Numerical Modelling”, Russian Journal Of Electrochemistry, 49, No. 4, Pp. 313–323, 2013.
  2. Martemianov, V.A. Raileanu, Ch. Coutanceau, Improvement Of The Proton Exchange Membrane Fuel Cell Performances By Optimization Of The Hot Pressing Process For Membrane Electrode Assembly”, Journal Of Solid State Electrochemistry, Vol. 18, No. 5, pp 1261-1269, 2014.
  3. Dib A., S. Martemianov, L. Makhloufi, B. Saidani, “Calibration Of Electrodiffusion Probes For Turbulent Flow Measurements”, Flow Measurement And Instrumentation, Vol. 35, pp 76-83, 2014.
  4. Thami Zeghloul, Lucian Dascalescu, Karim Rouagdia, Ali Fatihou, Pascal Renoux, Dominique Souchet, “Sliding conformal contact tribocharging of polymeric materials”, IEEE Transactions on Industry Applications, 2015.
  5. Martemianov, S., Adiutantov, N., Evdokimov, Y.K., Madier, L., Maillard, F., Thomas, A., New methodology of electrochemical noise analysis and applications for commercial Li-ion batteries, Solid State Electrochem., 2015, vol. 19, p. 2803.
  6. Thami Zeghloul, Lucian Dascalescu, Karim Rouagdia, Ali Fatihou, Pascal Renoux, Dominique Souchet, “Sliding conformal contact tribocharging of polymeric materials”, IEEE Transactions on Industry Applications, 2015, vol. 51, pp. 4555-4561.
  7. Clermont P. D. S., Paillat T., Peres G., Duval Y. , Jean Rivenc “Materials for Aircraft Fuel Tanks Characterized for Charge Generation from Flow Electrification with Jet A-1 Fuel.” IEEE Transactions on Dielectrics and Electrical Insulation (TDEI), vol. 23, no. 2, pp.624-632, 2016.
  8. Clermont P. D. S., Paillat T., Duval Y., Jean Rivenc, Peres G.; “Flow Electrification of an Electrically Charged Liquid.” International Journal of Engineering Science and Technology (IJIPEST), vol. 10, no. 2, pp. 125-130, 2016.
  9. Martemianov, F. Maillard, A. Thomas, P. Lagonotte, L. Madier, Diagnostic du bruit de batteries commerciales Li-ion en utilisant des moments d’ordre élevé, Journal Electrochimie Russe, 2016, 52, 1259 – 1268 (version russe).
  10. Martemianov, F. Maillard, A. Thomas, P. Lagonotte, L. Madier, Noise diagnosis of commercial Li-ion batteries using high-order moments, Russian Electrochemistry, 2016, 52, 1259 – 1268.
  11. A. Raileanu Ilie, S. Martemianov, A. Thomas, Investigation of the local temperature and overheat inside the membrane electrode assembly of PEM fuel cell, International Journal of Hydrogen Energy, 2016, 41, 15528-15537.
  12. Neagoe, B., Prawatya, Y., Zeghloul, T., Souchet, D., Dascalescu, L., “Laboratory bentch for the characterization of triboelectric properties of polymeric materials,” Electrostatics’2015, Journal of Physics : Conf. Ser. 646 012058, 2016.
  13. Zeghloul, T., Dascalescu, L., Roaugdia, K., Fatihou, A., Renoux, P., Souchet, D., “Sliding conformal contact tribocharging of polymeric materials,” IEEE Trans. Appl., 52 1808-1813, 2016.
  14. Leblanc, T. Paillat, J.M. Cabaleiro, G. Touchard, « Impact of the laminar flow on the electrical double layer development », Journal of Electrostatics, 2016. (Accepté, sous-presse) http://dx.doi.org/10.1016/j.elstat.2016.11.006.
  15. Maizia, A. Dib, A. Thomas, S. Martemianov, Proton exchange membrane fuel cell diagnosis by spectral characterization of the electrochemical noise, Journal of Power Sources, 2017, 342, 553-561.
  16. Neagoe, B., Teodorescu, H.-N., Prawatya, Y., Dascalescu, L., Zeghloul, T. « Experimental bench for studying the relation between the dynamic characteristics of the frictional motion and the electric potential at the surface of polymer slabs in sliding conformal contact », Tribology International, 111 (2017) 107 – 115. DOI: 10.1016/j.triboint. 2017.03.006
  17. Prawatya, Y.E., Neagoe, M.B., Zeghloul, T., Dascalescu, L., « Surface-electric-potential characteristics of tribo- and corona-charged polymers: A comparative study ». IEEE Trans. Ind. Appl.  53 (2017) 2423-2431. DOI: 10.1109/TIA.2017.2650145
  18. Neagoe, M.B, Prawatya, Y., Zeghloul, T., Dascalescu, L., « Electric-potential-measurement-based methodology for estimation of electric charge density at the surface of tribocharged insulating slabs, » J. Electrostat., 90 (2017) 123-130. DOI: 10.1016/j.elstat.2017.10.007
  19. Zeghloul, T., Neagoe, B., Prawatya, Y., D., Dascalescu, L., « Triboelectrical charge generated by frictional sliding contact between polymeric materials », IOP Conf. Series: Materials Science and Engineering ,174 (2017) 012002. DOI: 10.1088/1757-899X/174/1/012002
  20. Prawatya, Y., Neagoe, B., Zeghloul, T., Dascalescu, L., « Optimization of continuous triboelectrification process for polymeric materials in dry contact », IOPIOP Conf. Series: Materials Science and Engineering, 174 (2017) 012067. DOI: 10.1088/1757-899X/174/1/012067
  21. Neagoe, B., Prawatya, Y., Zeghloul, T., Dascalescu, L., « Influence of surface roughness on the tribo-electric process for a sliding contact between polymeric plate materials » IOP Conf. Series: Materials Science and Engineering, 174 (2017) 012003. DOI: 10.1088/1757-899X/174/1/012003
  22. Mastouri, L. Pichon, A. Thomas, T. Paillat, and S. Martemianov “Cyclic voltammetry study of solid (stainless steel 304 L) / liquid (NaCl 0.01M) interface: effect of applied potential” , Research Trends – Current Topics in Electrochemistry, 19 (2017) 81-89
  23. Maizia, A. Dib, A. Thomas, S. Martemianov, “Statistical short-time analysis of electrochemical noise generated within a proton exchange membrane fuel cell”, Journal of Solid State Electrochemistry (2017) 1-12, https://doi.org/10.1007/s10008-017-3848-0.
  24. Maizia, A. Dib, A. Thomas, S. Martemianov “Proton exchange membrane fuel cell diagnosis by spectral characterization of the electrochemical noise”, Journal of Power Sources, 342 (2017) 553-561.
  25. Leblanc, P.,Cabaleiro, J.M., Paillat, T., Touchard, G. “Impact of the laminar flow on the electrical double layer development” Journal of Electrostatics 88 (2017) 76-80
  26. Hazadji, Kheira; Tilmatine, Omar; Zeghloul, Thami; Neagoe, Marian-Bogdan; Dascalescu, Lucian; Study of the effect of plasma treatment on the triboelectric properties of Polyethylene (PE) and Polypropylene (PP) slabs, Journal of Physics: Conference Series, 1322 (1), 12011, 2019
  27. Lagonotte, P; Ilie, VA Raileanu; Martemianov, S; Thomas, A; Extrapolation to zero frequency with first time constant of ferri-ferrocyanide/Pt interface using Foster equivalent circuit and factorized modelling, Journal of Electroanalytical Chemistry, 839, p. 256-263, 2019
  28. Mastouri, Wejdene; Pichon, Luc; Martemianov, Serguei; Paillat, Thierry; Thomas, Anthony; ,, Effect of immersion time at the stainless steel 304L/NaCl (0.01 M) interface, Journal of Electrochemical Science and Engineering, 9 (2), p. 99-111, 2019
  29. Pai, David Z; Pailloux, Frédéric; Babonneau, David; ,, In situ Raman spectroscopy of nanostructuration by surface plasmas generated on alumina thin film-silicon bilayers, Plasma Sources Science and Technology, 28 (8), 85007, 2019
  30. Prawatya, Yopa Eka; Senouci, Khouira; Zeghloul, Thami; Neagoe, Marian Bogdan; Dascalescu, Lucian; Medles, Karim; Control charts for statistical process control of the tribocharging of polymer slabs in frictional sliding contact, IEEE Transactions on Industry Applications, 55 (5), p. 5253-5260, 2019
  31. Lagonotte, A. Thomas, V. A. Ilie, S. Martemianov, New insight on the capacitance of electrochemical batteries and capacitors using reservoir analogy, Current Topics in Electrochemistry, 20, p. 105-115, 2019
  32. Teodorescu, H-N, Prawatya, Y., Zeghloul, T., Dascalescu, L., Anisotropy of the triboelectric effects in polymeric slabs, Tribology International, 136, p. 496-507, 2019

Research tools

Communication medium

Videos